Refurbishing a PowerMac 6100/60 – final steps and showcase

To give you some perspective, below you can see the pictures of the before and after. Then, you can follow up watching the videos. Enjoy!

In the previous video, you see that there seems to be an issue when powering up the 6100. Basically, upon first power on, it didn’t display any image and didn’t do anything. Just halted. If I powered it down and up again, it then booted, but right after it start loading the extensions, it rebooted by itself and, only then, it proceeded to a full successful boot. Of course I wasn’t happy with this situation, and I was suspecting the lack of a CMOS battery could be the cause of this. So, I ordered a new 3.6v 1/2AA battery from Amazon and installed it as soon as it arrived, yesterday. Not surprisingly, the Mac started working as expected upon first boot try.

You can check this out in the below video.

External Macintosh M0130 floppy drive repair and clean up

In this video I show an attempt to repair an external Macintosh M0130 floppy drive I bought at eBay for £30. Seller sold this as for parts or not working as he said he was unable to test it – not unusual, as you would need a very old Macintosh to plug this in.

My hope was that the drive would be fully functional upon arrival, but for my disappointment, it wasn’t. Floppy disks wouldn’t get into the drive easily (I had to push them hard to get them in), and it wouldn’t eject the inserted disks afterwards. Needless to say it wasn’t reading the disks either.

So, I was determined to attempt a refurbish to this drive, as I do have a spare internal floppy removed from a non-working Mac SE that I thought it could work as a donor to this project. In the end, I didn’t have to try the “transplant” as the old drive did work after some hard cleaning and lubing works.